LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Engine Electrical Devices) >> Engine Electrical Devices >> Engine Control Module Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control Module Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the ECM connectors to the ECM.
  2. Align the ECM into the mounting base.
  3. Snap the ECM into its mounting base.
  4. Install the ECM trim locks.
  5. Install the air intake tube and resonator.
  6. Connect the negative battery cable.
  7. Perform a crankshaft position system variation learning procedure. Refer to TEC (TOOTH ERROR CORRECTION) LEARN PROCEDURE .
scientia non olet · About LEMON Manuals