LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Engine Electrical Devices) >> Engine Electrical Devices >> Camshaft Position Sensor Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor Removal and Installation: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the engine cover.
  3. Disconnect the sensor electrical connector.
    Fig 1: Identifying Sensor Electrical Connector
    G04716382Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove the timing belt front cover. Refer to TIMING BELT REMOVAL AND INSTALLATION .
  5. Remove the camshaft position sensor bolts.
  6. Remove the camshaft position sensor from the top.
    Fig 2: Camshaft Gears, Timing Belt and Camshaft Position Sensor Bolts
    G04716383Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals