Tightening Torque Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Application | N.m | lb-ft | lb-in |
|---|---|---|---|
| Air Cleaner Element Cover Screw | 2 | - | 17.7 |
| Air Cleaner Housing Bolts | 10 | - | 89 |
| Automatic Tensioner Bolt | 25 | 18 | - |
| Crankshaft Bearing Bridge and Oil Pan Scraper Bolts | 20 + 45° | 15 + 45° | - |
| Camshaft Bearing Cap Bolts | 8 | - | 71 |
| Camshaft Cover Bolts | 8 | - | 71 |
| Charcoal Canister Purge and Exhaust Gas Recirculation Solenoid Bracket Bolt | 5 | - | 44 |
| Connecting Rod Bearing Cap Bolts | 35 + 45° + 15° | 26 + 45° + 15° | - |
| Crankshaft Bearing Cap Bolts | 50 + 45° + 15° | 37 + 45° + 15° | - |
| Crankshaft Pulley Bolts | 20 | 15 | - |
| Crankshaft Gear Bolt | 145 + 30° + 15° | 107 + 30° + 15° | - |
| Cylinder Head Bolts | 25 + 90°+ 90° + 90° | 18 + 90°+ 90° + 90° | - |
| Engine Mount Bracket Retaining Bolts | 55 | 41 | - |
| Engine Mount Retaining Bolts | 45 | 33 | - |
| Exhaust Camshaft Gear Bolt | 50 + 60° + 15° | 37 + 60° + 15° | - |
| Flywheel Bolts | 65 + 30° + 15° | 48 + 30° + 15° | - |
| Front Timing Belt Cover Bolts | 6 | - | 53 |
| Generator-to-Intake Manifold Support Bracket Bolt | 22 | 16 | - |
| Generator-to-Intake Manifold Support Bracket Bolts | 37 | 27 | - |
| Intake Camshaft Gear Bolt | 50 + 60° + 15° | 37 + 60° + 15° | - |
| Intake Manifold Retaining Bolt and Nuts | 22 | 16 | - |
| Intake Manifold Support Bracket Lower Bolt | 25 | 18 | - |
| Intake Manifold Support Bracket Upper Bolts | 25 | 18 | - |
| Rear Timing Belt Cover Bolts | 7 | - | 62 |
| Spark Plug Cover Bolts | 8 | - | 71 |
| Spark Plugs | 20 | 15 | - |
| Timing Belt Automatic Tensioner Bolts | 25 | 18 | - |
| Timing Belt Idler Pulley Bolt | 25 | 18 | - |
| Timing Belt Idler Pulley Nut | 25 | 18 | - |
| Transaxle Torque Converter Bolts | 60 | 44 | - |
| Exhaust Flex Pipe-to-Exhaust Manifold Retaining Nut | 35 | 26 | - |
| Lower Reaction Rod Mount Bolt | 55 | 41 | - |
| Lower Reaction Rod Bracket Bolt | 69 | 49 | - |
| Exhaust Flex Pipe-to-Catalytic Converter or Connecting Pipe Retaining Nut | 35 | 26 | - |
| Oil Suction Pipe Bolt | 8 | - | 71 |
| Oil Suction Pipe Bracket Bolt | 6 | - | 53 |
| Direct Ignition System Coil and Exhaust Gas Recirculation Mounting Bracket Bolt | 25 | 18 | - |
| Exhaust Manifold Retaining Nut | 22 | 16 | - |
| Exhaust Manifold Heat Shield Bolt | 8 | - | 71 |
| Oil Pan Retaining Bolt | 10 | - | 89 |
| Transaxle Bell Housing Bolts | 75 | 55 | - |
| Oil Pan Flange-toTransaxle Bolts | 40 | 30 | - |
| Thermostat Housing Mounting Bolts | 15 | 11 | - |
| Coolant Bypass Housing Bolts | 15 | 11 | - |
| Oil Pump Retaining Bolts | 10 | - | 89 |