Input Shaft and Cluster Gear Disassembly and Assembly: Assembly

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Press the cluster shaft bearing onto the input shaft gear cluster.

Fig 1: Pressing Cluster Shaft Bearing Onto Input Shaft Gear Cluster
Courtesy of SUZUKI OF AMERICA CORP.
Press the input driveshaft into the input shaft gear cluster assembly.

Fig 2: Pressing Input Driveshaft Into Input Shaft Gear Cluster Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Install the snap ring at the base of the gear cluster.

Fig 3: Installing Snap Ring
Courtesy of SUZUKI OF AMERICA CORP.
Install the detent screw at the end of the input driveshaft.
Tighten

Tighten the input driveshaft detent screw to 15 N.m (11 lb-ft).

Fig 4: Installing Detent Screw
Courtesy of SUZUKI OF AMERICA CORP.