Surge Tank Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
- Install the surge tank to the support mount.
- Secure the surge tank with the attaching bolt.
Tighten:
Tighten the surge tank attaching bolt to 5 N.m (44 lb-in).
- Connect the return hose and the throttle body hose to the top of the surge tank.
- Connect the feed hose to the bottom of the surge tank.
- Secure the return hose, the throttle body hose, and the feed hose to the surge tank with the hose clamps.
- Fill the surge tank with the coolant to the center ridge, or to the MAX mark.