LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Lighting Systems) >> Repair Instructions >> Tail Lamps Removal and Installation (For STATION WAGON Model) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Tail Lamps Removal and Installation (For STATION WAGON Model): Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
  1. Install the rear combination lamps assembly.
  2. Install the rear combination lamps screws.

    Tighten: 

    Tighten the rear combination lamps screws to 3 N.m (27 lb-in).

  3. Connect the negative battery cable.
    Fig 1: Identifying Tail Lamp Assembly & Screws (Station Wagon Model)
    G04718076Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals