Center High Mount Stoplamp Removal and Installation (For STATION WAGON Model): Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.

Install the center high mounted stoplamp.
Install the center high mounted stoplamp nuts.
Tighten:

Tighten the center high mounted stoplamp nuts to 4 N.m (35 lb-in).

Fig 1: Identifying Center High Mount Stoplamp
Courtesy of SUZUKI OF AMERICA CORP.
Install the license plate lamps bracket.
Install the license plate lamps bracket bolts and nuts.
Install the station wagon door latch rod.
Install the rear wiper motor. Refer to REAR WINDOW WIPER MOTOR REMOVAL AND INSTALLATION (FOR HATCHBACK MODEL) .
Connect the electrical connector.

Fig 2: Identifying Center High Mount Stoplamp Electrical Connector
Courtesy of SUZUKI OF AMERICA CORP.
Install the tail gate trim cover.
Install the tail gate trim cover screws.
Connect the negative battery cable.

Fig 3: Identifying Tailgate Trim Cover
Courtesy of SUZUKI OF AMERICA CORP.