Shift Control Lever Assembly Removal and Installation: Removal

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the floor console. Refer to "FLOOR CONSOLE REMOVAL AND INSTALLATION :".
Disconnect the electrical switch connectors.

Fig 1: Removing Floor Console
Courtesy of SUZUKI OF AMERICA CORP.
Remove the shift control cable adjuster pinch nut.
Remove the cable from the bracket.

Fig 2: Removing Cable From Bracket
Courtesy of SUZUKI OF AMERICA CORP.
Remove the bolts and nuts holding the shift control assembly to the floor panel.
Remove the shift control assembly.

Fig 3: Removing Shift Control Assembly
Courtesy of SUZUKI OF AMERICA CORP.