Park/Neutral Start Switch Removal and Installation: Removal

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Disconnect the park/neutral position switch electrical connector.
Disconnect the shift control cable and the retaining clip.

Fig 1: Disconnecting Shift Control Cable And Retaining Clip
Courtesy of SUZUKI OF AMERICA CORP.
Remove the shift lever nut and the shift lever.

Fig 2: Removing Shift Lever Nut And Shift Lever
Courtesy of SUZUKI OF AMERICA CORP.
Remove the park/neutral start switch.

Fig 3: Removing Park/Neutral Start Switch
Courtesy of SUZUKI OF AMERICA CORP.