Left Transaxle Mounting Bracket Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Install the left transaxle mount bracket cage bolts and nut.
Tighten
- Tighten the left transaxle mount bracket cage bolt (a) to 110 N.m (81 lb-ft).
- Tighten the left transaxle mount bracket cage bolt (b) to 65 N.m (48 lb-ft).
- Tighten the nut (c) to 65 N.m (48 lb-ft).
  
  Fig 1: Installing Left Transaxle Mount Bracket Cage Bolts And Nut
  Courtesy of SUZUKI OF AMERICA CORP.
Install the left transaxle mounting bolts to 48 N.m (35 lb-ft).

Fig 2: Installing Left Transaxle Mounting Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Remove the engine support fixture DW110-060.
Install the battery. Refer to "BATTERY AND BATTERY TRAY REMOVAL AND INSTALLATION :".

Fig 3: Removing Engine Support Fixture DW110-060
Courtesy of SUZUKI OF AMERICA CORP.