Tools Required

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

DW260-070 Plug Remover/Installer

Disconnect the negative battery cable.
Raise and suitably support the vehicle.
Place a fluid container below the fluid drain plug.
Remove the transaxle fluid drain plug using the plug remover/installer DW260-070.

Fig 1: Removing Transaxle Fluid Drain Plug
Courtesy of SUZUKI OF AMERICA CORP.
Adding transaxle fluid. Refer to "TRANSAXLE FLUID LEVEL CHECKING PROCEDURE :".
Install the transaxle fluid drain plug using the plug remover/installer DW260-070.
Tighten

Tighten the Plug to 45 N.m (33 lb-ft).
Connect the negative battery cable.

Fig 2: Changing Fluid
Courtesy of SUZUKI OF AMERICA CORP.