Tools Required

DW260-060 Brake F Split Stop Ring Remover

1. Remove the side shaft. Refer to "SIDE SHAFT DISASSEMBLY AND ASSEMBLY :".
2. Take OFF the disc set and the brake F inner disc carrier.
   Fig 1: Removing Disc Set

   Courtesy of SUZUKI OF AMERICA CORP.
   Fig 2: Removing Brake F Inner Disc Carrier

   Courtesy of SUZUKI OF AMERICA CORP.
3. Mount fixture and remove the brake F split stop ring.
   Fig 3: Removing Brake F Split Stop Ring

   Courtesy of SUZUKI OF AMERICA CORP.
4. Remove the fixture and take off the cup spring.
   Fig 4: Removing Fixture And Take Off Cup Spring

   Courtesy of SUZUKI OF AMERICA CORP.
5. Release the piston F by applying compressed air to the bore.
   Fig 5: Releasing Piston F By Applying Compressed Air

   Courtesy of SUZUKI OF AMERICA CORP.
6. Remove piston F and bearing plate with spur gear.
7. Installation should follow the removal procedure in the reverse order.

   Removal Notice 

   Since the bearing set is tight, press the bearing plate upward from underneath to remove it.

   Fig 6: Removing Bearing Plate

   Courtesy of SUZUKI OF AMERICA CORP.