Rear Door Glass Removal and Installation: Installation
WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
- Install the glass in the door and position the glass within the window regulator.CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
- Install the glass screws.
Tighten
Tighten the glass screws to 7 N.m (62 lb-in).
- Install the exterior of the door sash inside door.
- Install the door seal trim. Refer to "DOOR SEAL TRIM REMOVAL AND INSTALLATION :".