LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Wipers/Washers) >> Repair Instructions >> Windshield Washer Pump(s) Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Windshield Washer Pump(s) Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the washer pump.
  2. Connect the washer hose to the washer pump.
  3. Connect the electrical connector.
    CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
  4. Install the front wheel well splash shield with the bolts and the screws.

    Tighten 

    Tighten the front wheel well splash shield bolts to 1.5 N.m (13 lb-in).

  5. Install the front left wheel. Refer to "WHEEL REMOVAL AND INSTALLATION :".
  6. Connect the negative battery cable.
    Fig 1: Installing Windshield Washer Pump
    G04104455Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals