Stabilizer Link Removal and Installation: Installation
WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
- Install the stabilizer link.
- Install the stabilizer link-to-strut assembly nut.
Tighten
Tighten the stabilizer link-to-strut assembly nut to 47 N.m (35 lb-ft).
- Install the stabilizer shaft-to-stabilizer link nut.
Tighten
Tighten the stabilizer shaft-to-stabilizer link nut to 47 N.m (35 lb-ft).