Control Arm Bushings Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Remove the control arm. Refer to "CONTROL ARM REMOVAL AND INSTALLATION :".
Remove the split sleeves from the rear control arm bushing.

Fig 1: Removing Split Sleeves From Rear Control Arm Bushing
Courtesy of SUZUKI OF AMERICA CORP.
Press off the control arm rear damping bushing using a press and the remover/installer KM-158.

Fig 2: Removing Control Arm Rear Damping Bushing
Courtesy of SUZUKI OF AMERICA CORP.