Control Arm Bushings Disassembly and Assembly: Assembly

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Press the control arm rear damping bushing into the control arm using a press and the remover/installer KM-158.

Fig 1: Installing Control Arm Rear Damping Bushing
Courtesy of SUZUKI OF AMERICA CORP.
Install the split sleeves into the rear control arm bushing.
Install the control arm. Refer to "CONTROL ARM REMOVAL AND INSTALLATION :".

Fig 2: Installing Split Sleeves Into Rear Control Arm Bushing
Courtesy of SUZUKI OF AMERICA CORP.