LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Front Suspension) >> Repair Instructions >> Ball Joint Disassembly and Assembly >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ball Joint Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the control arm. Refer to "CONTROL ARM REMOVAL AND INSTALLATION :".
  2. Drill off the heads of the two rivets with a 12 mm (0.47 inch) drill bit.
  3. Punch out the rivets with a drift.
    Fig 1: Punching Out Rivets With Drift
    G04103099Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals