LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Front Suspension) >> Repair Instructions >> Ball Joint Disassembly and Assembly >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ball Joint Disassembly and Assembly: Assembly

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the ball joint to the control arm by inserting two ball joint bolts from below the control arm.

    Tighten 

    Tighten the ball joint-to-control arm nuts to 100 N.m (74 lb-ft).

  2. Install the control arm. Refer to "CONTROL ARM REMOVAL AND INSTALLATION :".
    Fig 1: Identifying Control Arm
    G04103100Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals