LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 179 (Air Bag System) >> Repair Instructions >> Driver Airbag Module Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Driver Airbag Module Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, and 2007 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the audio control switch. Refer to AUDIO REMOTE CONTROL SWITCH REMOVAL AND INSTALLATION .
  3. Remove the cruise control switch. Refer to CRUISE CONTROL SWITCH REMOVAL AND INSTALLATION .
  4. Remove two driver airbag module mounting bolts and discard them.
  5. Remove the connectors from the driver airbag module.
  6. Remove the driver airbag module.
    Fig 1: Identifying Driver Airbag Module Mounting Bolt
    G04817490Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals