LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 170 (Wipers/Washers) >> Repair Instruction >> Windshield Wiper And Washer Switch Inspection >> Washer Linked Circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Washer Linked Circuit

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make sure that front wiper switch is at "OFF" position.
  2. Connect battery positive (+) terminal to terminal "5" and its negative (-) terminal to terminal "2".
  3. Connect voltmeter positive lead to terminal "4" and its negative lead to terminal "2".
  4. When front washer switch is ON, check that voltage changes as shown in figure.

    If check result is not satisfied, replace switch.

    Fig 1: Washer Linked Circuit Diagram
    G04809826Courtesy of SUZUKI OF AMERICA CORP.