LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 162 (Steering Wheel And Column) >> Repair Instructions >> Steering Angle Sensor Removal And Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Angle Sensor Removal And Installation: Installation

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install steering angle sensor (2) by fitting engagement parts (1) of contact coil cable assembly to claws of steering angle sensor as shown in figure.
    Fig 1: Identifying Engagement Parts Of Contact Coil Cable Assembly & Steering Angle Sensor
    G04809079Courtesy of SUZUKI OF AMERICA CORP.
  2. Install contact coil cable assembly and steering wheel. Refer to CONTACT COIL CABLE ASSEMBLY REMOVAL AND INSTALLATION  and STEERING WHEEL REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals