Engine Control Module (ECM) Removal And Installation: Removal

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative cable from battery.
Remove ECM cover from bracket.
Disconnect connectors from ECM as follows.
1. Push lock (1) to release locking of lock lever (2).
2. Turn lock lever to arrow direction until it stops.
  
  Fig 1: Pushing Lock & Locking Lever
  Courtesy of SUZUKI OF AMERICA CORP.
Remove ECM (1) from its bracket by removing its mounting bolts (2).

Fig 2: Identifying ECM Connector Mounting Bolts
Courtesy of SUZUKI OF AMERICA CORP.