Accelerator Pedal Position (App) Sensor Assembly Removal And Installation: Installation

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Reference: ACCELERATOR PEDAL POSITION (APP) SENSOR ASSEMBLY INSPECTION

Reverse removal procedure for installation noting the following.

Tighten accelerator pedal position (APP) sensor assembly upper nut (1) first and then lower nuts (2) to specified torque.
Tightening torque

Accelerator pedal position (APP) sensor assembly nut a: 6.0 N.m (0.6 kg-m, 4.5 lb-ft)

Fig 1: Accelerator Pedal Position Sensor Assembly With Mounting Nuts
Courtesy of SUZUKI OF AMERICA CORP.
If APP sensor assembly bracket is removed, tighten its mounting nuts to specified torque.
Tightening torque

APP sensor assembly bracket nut a: 6.0 N.m (0.6 kg-m, 4.3 lb-ft)
Connect connector to accelerator pedal position (APP) sensor assembly securely.