LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Air Conditioning System) >> Repair Instructions >> A/C Condenser Assembly Removal And Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A/C Condenser Assembly Removal And Installation: Removal

WARNING: This page is about a different car, the 2007 Suzuki Grand Vitara and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative (-) cable at battery.
  2. Recover refrigerant from A/C system referring to OPERATION PROCEDURE FOR CHARGING A/C WITH REFRIGERANT .
    NOTE: The amount of removed compressor oil must be measured for replenishing compressor oil.
  3. Remove front bumper assembly referring to FRONT BUMPER COMPONENTS .
  4. Remove front bumper upper member referring to FRONT BUMPER COMPONENTS .
  5. Disconnect compressor discharge hose (1) and liquid pipe (2) from condenser assembly (4).
    CAUTION: As soon as above hose and pipe are disconnected, cap opened fittings so that moisture and dust do not enter condenser.
  6. Remove condenser assembly mounting bolts (3), and then remove condenser assembly.
    NOTE: Be careful not to damage fins of condenser and radiator.
    Fig 1: Identifying Compressor Discharge Hose, Liquid Pipe & Condenser Assembly
    G04809242Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals