LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Air Conditioning System) >> Diagnostic Information And Procedures >> DTC Clearance >> Using SUZUKI Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using SUZUKI Scan Tool

WARNING: This page is about a different car, the 2007 Suzuki Grand Vitara and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch to OFF position.
  2. Connect SUZUKI scan tool to data link connector (DLC) (1).

    Special Tool 

    1. SUZUKI scan tool 
      Fig 1: Connecting SUZUKI Scan Tool To Data Link Connector
      G04809214Courtesy of SUZUKI OF AMERICA CORP.
  3. Turn ignition switch to ON position.
  4. Erase DTC according to instructions displayed on SUZUKI scan tool. Refer to scan tool operator's manual for further details.
  5. After completing the clearance, turn ignition switch to OFF position and disconnect SUZUKI scan tool from DLC.
  6. Perform DTC CHECK  and confirm if normal DTC (NO CODES) is displayed.
scientia non olet · About LEMON Manuals