"4" Position Switch Inspection
WARNING: This page is about a different car, the 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative cable at battery.
- Remove front console box.
- Disconnect manual selector connector (1).
- Measure resistance between "4" position switch terminals.
"4" position switch specification
Shift selector lever to "P", "N" or "D" range: 3.96 - 4.04 kΩ
Shift selector lever to "R", "4", "3" or "L" range: 0.99 - 1.01 kΩ