Front Disc Brake Caliper Disassembly And Assembly: Assembly: Notes
WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
Reference: FRONT DISC BRAKE COMPONENTS
Reference: FRONT DISC BRAKE CALIPER REMOVAL AND INSTALLATION
Reference: FRONT DISC BRAKE CALIPER INSPECTION
Reassemble front brake in reverse order of disassembly, noting the following points.
CAUTION:
- Wash each part cleanly before installation in the same fluid as the one used in master cylinder reservoir.
- Never use other fluid or thinner.
- Before installing piston and cylinder boot to cylinder, apply fluid to them.
- After reassembling brake lines, bleed air from them.
- Before installing piston to cylinder, apply rubber grease to inside (bore side) of cylinder.