LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (Engine Mechanical) >> Specifications >> Fastener Information >> Standard Tightening Torque >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Standard Tightening Torque: Notes

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Each fastener should be tightened to the torque specified in each section of this service information . If no description or specification is provided, refer to the following tightening torque charts for the applicable torque for each fastener. When a fastener of greater strength than the original one is used, however, use the torque specified for the original fastener.

NOTE:
  • For the flanged bolt, flanged nut and self-lock nut of 4T and 7T strength, add 10 percent to the tightening torque given in the following charts.
  • The following charts are applicable only where the fastened parts are made of steel light alloy.
scientia non olet · About LEMON Manuals