Output Shaft Disassembly And Assembly: Disassembly

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Remove output shaft rear snap ring.
Apply bearing puller to output shaft front bearing (1), and drive out output shaft front bearing, output shaft gear (2) and output shaft rear bearing (3) all at once from output shaft using press.

Fig 1: Identifying Bearing Puller To Output Shaft Front Bearing
Courtesy of SUZUKI OF AMERICA CORP.