Gear Shift Control Lever Rear Case Assembly Removal And Installation: Installation
WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
- Install gear shift control lever rear case assembly with its plate to transfer case or extension case referring to figure for proper installing direction of control shaft joint bolt (2). Tighten plate bolts (1) and control shaft joint nut (3) to specified torque.
Tightening torque
Plate bolt a: 23 N.m (2.3 kg-m, 17.0 lb-ft)
Control shaft joint nut b: 18 N.m (1.8 kg-m, 13.0 lb-ft)
- Remount transmission assembly to vehicle referring to MANUAL TRANSMISSION ASSEMBLY DISMOUNTING AND REMOUNTING