Front Door Trim Panel Removal

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required:

KM-475-B Trim Remover

Lower the front door window.
Pry off the inside door handle trim bezel.
Remove the rear deck lid remote switch and the power window/mirror control switch.
Disconnect the electrical connectors.

Fig 1: Identifying Rear Deck Lid Remote Switch And Power Window/Mirror Control Switch
Courtesy of SUZUKI OF AMERICA CORP.
Remove the door trim panel screws.
Pry off the trim panel using the trim remover KM-475-B.
Remove the door step lamp.

Fig 2: Identifying Door Step Lamp
Courtesy of SUZUKI OF AMERICA CORP.