Front Door Trim Panel Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Install the door step lamp.
Install the trim panel.
Connect the electrical connectors.
Install the rear deck lid remote switch and the power window/mirror control switch.

Fig 1: Identifying Door Step Lamp
Courtesy of SUZUKI OF AMERICA CORP.
Install the door trim panel screws.
Tighten:

Tighten the door trim panel screws to 2.5 N.m (22 lb-in.).
Instal the inside door handle trim bezel.
Raise the front window.

Fig 2: Identifying Rear Deck Lid Remote Switch And Power Window/Mirror Control Switch
Courtesy of SUZUKI OF AMERICA CORP.