Luggage Compartment Lock Striker Installation
WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the lock release cable.CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
- Install the lock striker with the bolts.
Tighten:
Tighten the luggage compartment lock striker bolts to 8 N.m (71 lb-in.).
- Install the luggage compartment rear lower cover. Refer to LUGGAGE COMPARTMENT REAR LOW COVER INSTALLATION .