Inside Door Handle Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Connect the inside door handle and the lock rods.
Insert the inside door handle into the slots in the door.
Slide the door handle forward.
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
Install the door seal trim. Refer to DOOR SEAL TRIM INSTALLATION .

Fig 1: Identifying Door Lock Screws And Lock Rods
Courtesy of SUZUKI OF AMERICA CORP.