Rear Combination Lamps Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Install the replacement bulbs.
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
Install the lamp assembly with the nuts.
Tighten:

Tighten the rear combination lamp assembly nuts to 3 N.m (27 lb-in.).
Connect the electrical connectors.
Connect the negative battery cable.

Fig 1: Identifying Rear Combination Lamp And Nuts
Courtesy of SUZUKI OF AMERICA CORP.