License Plate Lamps Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Install the replacement bulb.
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
Install the license plate lamp assembly with the screws.
Tighten:

Tighten the license plate lamp assembly screws to 4 N.m (35 lb-in.).
Connect the negative battery cable.

Fig 1: Identifying License Plate Lamp Assembly And Screws
Courtesy of SUZUKI OF AMERICA CORP.