A/C Pressure Transducer Removal

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Release the connector lock and pull the transducer wire connector out.

Fig 1: Identifying A/C Pressure Transducer Wire Connector
Courtesy of SUZUKI OF AMERICA CORP.
Remove the transducer with a wrench.
Discard the O-ring seal.

Fig 2: Identifying A/C Pressure Transducer
Courtesy of SUZUKI OF AMERICA CORP.