LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Air Conditioning System) >> Automatic >> Diagnostic Information and Procedures >> Controller Does Not Illuminate When Light Switch Is ON
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Controller Does Not Illuminate When Light Switch Is ON

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Controller Does Not Illuminate When Light Switch Is On Circuit Diagram
G04720091Courtesy of SUZUKI OF AMERICA CORP.
DIAGNOSTIC PROCEDURE

Step Action Value (s) Yes No
1 Check other instrumentation lights.
Are those lights also OFF?		 - Go to INSTRUMENT CLUSTER INDICATOR LAMPS DIAGNOSIS . Go to Step 2
2
  1. Remove the controller.
  2. Check the voltage between terminals A3 and A4 of the controller connector.

Is the voltage within the specified value?		 11 - 14 V Go to Step 4 Go to Step 3
3 Repair the wiring harness between splice S204 and controller connector terminal A4 or between splice S204 and controller connector terminal A3.
Is the repair complete?		 - System OK -
4 Check the illumination lamps.
Is one burned out?		 - Go to Step 5 Go to Step 6
5 Replace the burned out illumination lamp.
Is the repair complete?		 - System OK -
6 Replace the ATC controller.
Is the repair complete?		 - System OK -
scientia non olet · About LEMON Manuals