LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Steering Wheel And Column) >> Repair Instructions >> Wiper Lever Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wiper Lever Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector to the wiper switch. Connect the cruise control connector, if equipped.
    Fig 1: Identifying Cruise Control Electrical Connector
    G04719872Courtesy of SUZUKI OF AMERICA CORP.
  2. Install the wiper switch by snapping it into the switch housing.
    Fig 2: Identifying Switch Housing Tabs & Wiper Switch
    G04719871Courtesy of SUZUKI OF AMERICA CORP.
  3. Install the upper and the lower steering column cover panels. Install the upper and the lower steering column cover panel screws.

    Tighten: 

    Tighten the upper and the lower steering column cover panel screws to 2.5 N.m (22 lb-in.).

  4. Connect the negative battery cable.
    Fig 3: Identifying Upper And Lower Steering Column Cover Panel Screws
    G04719866Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals