Park / Neutral Start Switch Removal

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the air filter housing.
Disconnect the Park/Neutral position switch electrical connector.
Disconnect the shift control cable and the retaining clip.

Fig 1: Identifying Park/Neutral Position Switch Electrical Connector
Courtesy of SUZUKI OF AMERICA CORP.
Remove the shift lever nut and the shift lever.

Fig 2: Identifying Shift Lever And Nut
Courtesy of SUZUKI OF AMERICA CORP.
Remove the Park/Neutral start switch.

Fig 3: Identifying Park/Neutral Start Switch & Bolts

Courtesy of SUZUKI OF AMERICA CORP.