LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Automatic Transmission) >> Diagnostic Information and Procedures >> DTC Identification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Identification

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
DTC IDENTIFICATION CHART

DTC Description Indication Default Action
P0562 System Voltage Low MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
P0563 System Voltage High MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
P0601 Internal Control Module Memory Checksum Error MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
P0603 Internal Control Module Keep Alive Memory (KAM) Error MIL ON
  • The TCM will record operating conditions at he time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
P0604 Internal Control Module Random Access Memory (RAM) Error MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
P0606 Transaxle Control Module Processor Fault MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
P0703 Brake Switch Circuit Malfunction No Change
  • TCM assume that the brake light always active.
  • Open lock-up clutch.
P0705 transaxle Range Sensor Circuit Malfunction (PRNDL Input) MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control, position P, R and N also possible.
P0710 transaxle Fluid Temperature Out of Range Hold Lamp Flashing
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • TCM assume the transaxle fluid temperature is 60 °C (140 °F).
  • No influence at vehicle running.
P0711 transaxle Fluid Temperature Sensor Circuit Range/Performance Hold Lamp Flashing
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • TCM assume the transaxle fluid temperature is 60 °C (140 °F).
  • No influence at vehicle running.
P0712 transaxle Fluid Temperature Sensor Circuit Shorted to Ground Hold Lamp Flashing
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • TCM assume the transaxle fluid temperature is 60 °C (140 °F).
  • No influence on drivability.
P0713 Transaxle Fluid Temperature Sensor Circuit Shorted to Power and open Hold Lamp Flashing
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • TCM assume the transaxle fluid temperature is 60 °C (140 °F).
  • No influence on drivability.
P0715 Input Speed Sensor Circuit Malfunction MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control, position P, R and N also possible.
  • Open lock-up clutch.
P0716 Input Speed Sensor Circuit Range/Performance MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control, position P, R and N also possible.
  • Open lock-up clutch.
P0717 Input Speed Sensor Circuit No Signal MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control, position P, R and N also possible.
  • Open lock-up clutch.
P0720 Output Speed Sensor Circuit Malfunction MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • Open lock-up clutch.
P0721 Output Speed Sensor Circuit Range/Performance MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • Open lock-up clutch.
P0722 Output Speed Sensor Circuit No Signal MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Vehicle running remains actual gear.
  • Open lock-up clutch.
P0725 Engine Speed Input Circuit Malfunction No Change
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • Open lock-up clutch.
P0726 Engine Speed Input Circuit Range/Performance Hold Lamp Flashing
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • Open lock-up clutch.
P0727 Engine Speed Input Circuit No Signal Hold Lamp Flashing
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • Open lock-up clutch.
P0731 Gear 1 Incorrect Ratio MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • High line pressure.
P0732 Gear 2 Incorrect Ratio MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 3rd gear.
  • High line pressure.
P0733 Gear 3 Incorrect Ratio MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • High line pressure.
P0734 Gear 4 Incorrect Ratio MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • High line pressure.
P0741 TCC (Torque Converter Clutch) Circuit Stuck OFF MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Open lock-up clutch.
P0742 TCC (Torque Converter Clutch) Circuit Stuck ON MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Open lock-up clutch.
P0781 1 - 2 Shift Malfunction MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 1st gear.
  • Open lock-up clutch.
P0782 2 - 3 Shift Malfunction MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 2nd gear.
  • Open lock-up clutch.
P0783 3 - 4 Shift Malfunction MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 3rd gear.
  • Open lock-up clutch.
P1604 Data Check of Internal & Extended Ram Failed MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
P1606 Failure of External Watchdog MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1779 Engine Torque Input Signal (CAN) Malfunction No Change
  • Adjustable value, calculated over the substitute map throttle position. (engine speed, engine torque)
P1791 Throttle Position Input Signal (CAN) Malfunction No Change
  • Adjustable value, calculated over the substitute map throttle position. (engine speed, engine torque)
P1839 EDS3 Output Shorted To Ground MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1840 EDS3 Output Shorted To Power MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1841 EDS3 Output Open MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1850 Solenoid 1 Output Shorted To Ground Hold Lamp Flashing
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
P1851 Solenoid 1 Output Shorted To Power Hold Lamp Flashing
  • Hold lamp will blink.
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
P1852 Solenoid 1 Output Open Hold Lamp Flashing
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
P1853 Solenoid 2 Output Shorted To Ground MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
P1854 Solenoid 2 Output Shorted To Power MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
P1855 Solenoid 2 Output Open MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
P1861 EDS4 Output Shorted To Ground MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1862 EDS4 Output Shorted To Power MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1863 EDS4 Output Open MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1864 EDS5 Output Shorted To Ground MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1865 EDS5 Output Shorted To Power MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1866 EDS5 Output Open MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1867 EDS6 Output Shorted To Ground MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1868 EDS6 Output Shorted To Power MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1869 EDS6 Output Open MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1871 EDS Valve Power Supply Circuit Shorted To Power MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1874 Solenoid Valve Power Supply Circuit Shorted To Power MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
P1881 2 - 1 Shift Malfunction MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 3rd gear.
  • Open lock-up clutch.
P1883 3 - 2 Shift Malfunction MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 3rd gear.
  • Open lock-up clutch.
P1884 4 - 3 Shift Malfunction MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • Open lock-up clutch.
P1885 3 - 1 Shift Malfunction MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 3rd gear.
  • Open lock-up clutch.
U0073 CAN Bus OFF Failure MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
U0100 CAN Receive ECM Message Failure MIL ON
  • The TCM will record operating conditions at he time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
U0101 CAN Transmit Message Failure MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
scientia non olet · About LEMON Manuals