Rotor Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: To guarantee uniform braking, always refinish both rotors even if only one rotor is defective.

Install the rotor on the front wheel hub and install the detent screw.
Tighten:

Tighten the rotor detent screw to 4 N.m (35 lb-in.).

Fig 1: Identifying Rotor Detent Screw
Courtesy of SUZUKI OF AMERICA CORP.
Apply a few drops of thread-locking compound to the caliper bracket mounting bolts and install the caliper bracket.
Tighten:

Tighten the caliper bracket mounting bolts to 95 N.m (70 lb-ft).
Install the brake shoes and the caliper. SeeShoe and Lining Installation .

Fig 2: Identifying Caliper Mounting Bolts
Courtesy of SUZUKI OF AMERICA CORP.