Caliper Disassembly

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Remove the caliper. Refer to Caliper Removal .
WARNING: Do not attempt to catch the piston when attempting to remove the piston with compressed air. The piston will pop out of its bore with enough force to damage a hand or fingers.

CAUTION: When removing the caliper piston with compressed air, insert a piece of hardwood into the caliper to prevent damage to the piston.
Apply unlubricated, compressed air at the hose inlet of the caliper.

Fig 1: Applying Unlubricated, Compressed Air At Hose Inlet Of Caliper
Courtesy of SUZUKI OF AMERICA CORP.
Remove the piston from its bore and remove the piston dust seal.

Fig 2: Measuring Brake Shoe Linings For Minimum Thickness
Courtesy of SUZUKI OF AMERICA CORP.
Remove the inner seal from the bore. Avoid scratching the bore.
Remove the bleeder valve dust cap and the bleeder valve.

Fig 3: Identifying Bleeder Valve Dust Cap
Courtesy of SUZUKI OF AMERICA CORP.