LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Wheel And Tires) >> Repair Instructions >> Wheel Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wheel Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Before installing the wheels, remove any buildup of corrosion on the wheel mounting surface and the rotor mounting surface by scraping and brushing them with a wire brush. Installing the wheels without good metal-to-metal contact at the mounting surfaces can cause the wheel nuts to loosen, which can later allow a wheel to come off while the vehicle is moving. Wheel bolts must be tightened in sequence and to the proper torque to avoid bending the wheel or the rotor.
  1. Mount the wheel and tire assembly.
  2. Install the wheel nuts in the sequence shown. Do not tighten the wheel nuts.
  3. Lower the vehicle.

    Tighten: 

    Tighten the wheel nuts to 110 N.m (81 lb-ft).

  4. Install the wheel cover.
scientia non olet · About LEMON Manuals