Yaw Rate/G Sensor Assembly Removal and Installation: Installation

Reference: YAW RATE/G SENSOR INSPECTION 

1. Before installing yaw rate/G sensor assembly (1), check installing condition as follows.
   • Deformations around sensor installation area (2) (in sensor bracket).
   • Foreign matters on mating surface between sensor and sensor bracket.
2. Install yaw rate/G sensor assembly (1) to floor panel.

   Tightening torque 

   Yaw rate/G sensor assembly bolt a: 6.5 N.m (0.65 kg-m, 5.0 lb-ft) 

   Fig 1: Identifying Yaw Rate/G Sensor Assembly

   Courtesy of SUZUKI OF AMERICA CORP.
3. Connect connector to yaw rate/G sensor assembly.
4. Install console box, referring to CONSOLE BOX COMPONENTS .
5. Connect negative (--) cable to battery.