LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Brakes - Esp >> Repair Instruction >> Sensor Calibration >> Not Using SUZUKI Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Not Using SUZUKI Scan Tool

  1. Set steering wheel in straight-ahead position.
  2. Connect battery terminals and/or fuse and start engine.
    CAUTION: When power is not supplied to the steering angle sensor by removing battery or fuse, DTC C1075 is detected and SLIP indicator light (1) flashes.
    If DTC other than C1075 is detected, SLIP indicator light flushes and other indicator illuminate. In that case, repair the detected DTC first.
    Fig 1: Identifying SLIP Indicator Light
    G04847694Courtesy of SUZUKI OF AMERICA CORP.
  3. Drive straight for approximately 35 km/h (21.8 mph) or more and 10 seconds or more.
scientia non olet · About LEMON Manuals