Precautions in Sensor Calibration

Steering angle sensor transmits the absolute steering angle value calculated with the steering neutral position (calibration point) required by ESP® control module.

TCS and stability control system use this set of data.

When the following operation is done, calibration should be performed since the original calibration points are deleted.

• Power is not supplied to steering angle sensor. (battery and/or fuse is removed.)
• Steering angle sensor is replaced.
• Power is not supplied to ESP® control module. (battery, fuse and/or connector is removed.)
• ESP® hydraulic unit / control module assembly is replaced.

Perform sensor calibration according to SENSOR CALIBRATION .