LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Brakes - Esp >> Diagnostic Information & Procedure >> Fail-Safe Table
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fail-Safe Table

When any of the following DTC(s) is detected, ESP® system is in fail-safe mode per its DTC and ABS, EBD, TCS / stability functions are deactivated until the resolution is applied.

FAIL-SAFE TABLE

DTC No. Fail-safe operation Fail-safe condition resolutive
ABS EBD TCS / stability
C1016 X • X When ESP® control module detects the system as normal, after ignition switch turned OFF to ON.
C1017 • • X When ESP® control module detects the system as normal, after ignition switch turned OFF to ON.
C1020 X • X When ESP® control module detects the system as normal, after ignition switch turned OFF to ON.
C1021 X (1) X When ESP® control module detects the system as normal, after ignition switch turned OFF to ON.
C1025
C1031
C1035
C1022 X (1) X When ESP® control module detects the system as normal. And estimated vehicle speed exceeds 14 km/h (9 mile/h), after ignition switch turned OFF to ON.
C1026
C1032
C1036
C1023 • • X When ESP® control module detects the system as normal, after ignition switch turned OFF to ON.
C1024 • • X When ESP® control module detects the system as normal, after ignition switch turned OFF to ON.
C1027 (3) • • • When ESP® control module detects the system as normal, after ignition switch turned OFF to ON. (ESP® OFF switch becomes effective.)
C1028 X • X When ESP® control module detects the system as normal, after ignition switch turned OFF to ON.
C1033 X (2) X When ESP® control module detects the system as normal, after ignition switch turned OFF to ON.
C1034 • • X When ESP® control module detects the system as normal, after ignition switch turned OFF to ON.
C1037 • • • -
C1038 • • X When ESP® control module detects the system as normal, after ignition switch turned OFF to ON.
C1039 • • X When ESP® control module detects the system as normal, after ignition switch turned OFF to ON.
C1040 (1) X • X When ESP® control module detects the system as normal, after ignition switch turned OFF to ON.
C1041 X X X When ESP® control module detects the system as normal, after ignition switch turned OFF to ON.
C1042
C1043
C1044
C1045
C1046
C1051
C1052
C1053
C1054
C1055
C1056
C1057 X (2) X When ESP® control module detects the system as normal.
C1061 X • X When ESP® control module detects the system as normal. And estimated vehicle speed exceeds 14 km/h (9 mile/h), after ignition switch turned OFF to ON.
C1063 X (3) X When ESP® control module detects the system as normal, after ignition switch turned OFF to ON.
C1071 X X X When ESP® control module detects the system as normal, after ignition switch turned OFF to ON.
C1075 • • X Steering angle sensor calibration completed.
C1091 • • X When ESP® control module detects the system as normal, after ignition switch turned OFF to ON.
C1096 • • X When ESP® control module detects the system as normal, after ignition switch turned OFF to ON.
U0073 • • X When ESP® control module detects the system as normal, after ignition switch turned OFF to ON.
U0100 • • X When ESP® control module detects the system as normal, after ignition switch turned OFF to ON.
U0101
U0114
U0123
U0126
NOTE: •: Activated
X: Deactivated
(1) If one wheel speed sensor is defective, EBD control function is activated. If two or more wheel speed sensor are defective, EBD control function is deactivated.
(2) If one or two wheel speed sensor is defective, EBD control function is activated. If three or more wheel speed sensor are defective, EBD control function is deactivated.
(3) ESP® OFF mode is cancelled and all control functions are activated.
(4) If the control module requests pressure-decrease or pressure-hold for specified time or longer for all wheels, the state is judged failure, and the emergency brake is applied. The state returns to be normal after stop of the vehicle, if any other failures are not found.
(5) EBD control function is activated only power supply circuit becomes 7.6 - 9.6 V malfunction.
(6) EBD control function is activated only solenoid valve power supply driver circuit is shorted to power circuit and/or output circuit from control unit is opened malfunction.
scientia non olet · About LEMON Manuals