LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 4WD L4-2.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Monitors, Trips, Drive Cycles and Readiness Codes >> Misfire Monitor (EVAP Leak Check Model)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Misfire Monitor (EVAP Leak Check Model)

OBD System Description - Misfire Monitor (EVAP Leak Check Model)

System Description / Monitoring Procedure
ECM measures the angle speed of the crankshaft based on the pulse signal from the CKP sensor and CMP sensor for each cylinder. If it detects a large change in the angle speed of the crankshaft, it concludes occurrence of a misfire. When the number of misfire is counted by the ECM beyond the DTC detecting condition, it determines the cylinder where the misfire occurred and outputs it as DTC.

DTC Description / Detecting Condition / Confirmation Procedure

P0300, P0301, P0302, P0303, P0304
Refer to DTC P0300 / P0301 / P0302 / P0303 / P0304: Random Misfire Detected / Cylinder 1 / Cylinder 2 / Cylinder 3 / Cylinder 4 Misfire Detected. P0300

Misfire Monitor

Operation:




Enable Conditions:




Typical Malfunction Thresholds:





MODE $06 Data

Mode $06 Data:




scientia non olet · About LEMON Manuals